WaJuFo synthetic ice is a completely new product. It is not installed by panel connection like traditional synthetic ice. Wajufo synthetic ice is installed by liquid pouring, which create a seamless connection. Our raw material is eco-friendly. You can also embed the lines under the ice before installation. As a result of skating, our ice rinks may develop surface scratches. Don’t worry. When the scratches are serious, we can install it again. Skating on Wajufo ice is very similar to skating on a real ice rink. In fact, only a professional skater will notice the difference. You can skate on our ice with any type of ice skates, including hockey or figure skates.
Performance characteristics | Wajufo liquid synthetic ice | Synthetic Ice Rink |
Material | Modified two-component synthetic resin | Polyethylene |
Production method | Ice pouring on site at room temperature | On-site assembly of plastic panels |
Whether there are seams | One-piece molding without seams | Lots of seams |
Can the marking line be buried under the ice? | Can | Can not |
Whether professional bladed ice skates? | Yes | No professional edge |
Whether to polish and wax every day? | No need | Polished and waxed every day |
Is there a gap between the ice layer and the foundation | No | yes |
Sensitivity to temperature |
Not sensitive |
It expands and shrinks when heated, and shrinks when it cools down |
Ice surface changes after taxiing | A small amount of ice slag | A lot of burrs or plastic filaments |
Static electricity situation | Very low static |
A large amount of electrostatic adsorption of dust |
Maintenance cost | Extremely low | Low |
Can the ice be repaired at any time | Can | Can not |
Basic requirements | Qualified commercial mixed floor | Qualified commercial mixed floor |
3m ruler≤3mm | 3m ruler≤3mm |
Feature content | Refrigeration ice rink | Ecological ice rink |
Venue space requirements | Special venues for ice rinks, with floors above 7 meters, need to be equipped with professional equipment rooms | Conventional indoor space, and outdoor canopy space, no equipment room is required |
Venue dehumidification and exhaust requirements | A complete dehumidification and exhaust system needs to be installed in the venue, and a sufficient number of corresponding equipment needs to be configured. | No need to install a dedicated dehumidification system |
Basic requirements for ice rink | Special multi-layer complex structure | Conventional concrete floor above C25 |
Matching equipment for site use | Need to configure large refrigeration units, cooling equipment, dehumidification and exhaust equipment | No need to configure equipment |
Maintenance equipment | Need to configure professional ice sweeping and pouring equipment | Configure simple mop, suction device and curing agent |
Professional staffing requirements | Need professional equipment maintenance personnel, and professional ice maker | Configure general sanitary cleaners |
(1800 square meters standard ice hockey rink) | Water and electricity costs 1.8-3.0 million RMB/year (Specific energy consumption depends on construction areas and equipment used. Venue lighting and air-conditioning are not included.) | Water and electricity fee for ice rink: 0 (Excluding venue lighting and air conditioning) |
Maintenance cost (Equipment maintenance and technical personnel) | Technical personnel and equipment accessories: 500,000-800,000 RMB/year | Labor and materials: 50,000-80,000 RMB/year |
Routine maintenance intervals | Many times a day, pouring ice for maintenance | Sanitation cleaning: 1 time/day Site maintenance: 1 time/week |
Venue life | 6-10 year | 5-8year |
Feature content | Artificial refrigeration ice rink | Ecological ice rink |
Ice making material | Water + electricity | Modified polymer |
Ice making method | Professional water refrigeration system makes ice, Keep water and electricity frozen | Pouring on-site and making "ice" at room temperature One-time molding, long-term use |
Are there seams on the ice | Seamless | Seamless |
Whether the ice layer and foundation are hollow | Blended into one, no hollow drum | Blended into one, no hollow drum |
Whether the marking can be embedded on the ice surface | Can pre-embed marking slogans, logos, etc. | Can pre-embed marking slogans, logos, etc. |
Whether to use professional ice skates | Use regular professional bladed ice skates | Use regular professional bladed ice skates |
Whether to produce self-lubricating | Ice water mixture lubrication factor | The ice rink can continuously penetrate the self-lubricating factor |
Sliding lubricity | Excellent | Close to water cooling ice 80-90% |
Ice surface loss | Every time you rub and brake, the ice surface will suffer from significant damage. | Every time you rub ice and brake, small ice powder will be produced on the ice surface, resulting in little ice surface damage. |
Can the ice be repaired | Sweep the ice to repair the ice surface every day | When surface friction reaches to a certain degree (2-3 years), sand the area with greater wear, and re-spray the ice surface |
Suitable ambient temperature for the venue | Stay below zero | Suitable for -45℃-50℃ floor temperature |
Any surface is suitable as long as it is flat, levelled and hard. Hence, you can build Wajufo synthetic ice rinks directly on concrete, wood, asphalt, marble etc.
Skating on Wajufo ice is very similar to skating on a real ice rink because inside structure of our ice is similar to real ice.
In fact, only a professional skater will notice the difference.
Curling stone at 19.96 kgs is OK on our ice.
You can skate on Wajufo ice with any type of ice skates, including hockey or figure skates.
On Wajufo ice, you can do whatever you do when you are on the real ice, even including professional figure skating action.
Dust and shavings can be removed using a vacuum cleaner or a broom daily. The surface can be wet-cleaned weekly using a cleaning machine with a rotating disc or a power washer with special liquid curing agent.
Wajufo synthetic ice does not need large amount of electricity or water no matter installation or maintenance.